07:22
Rishi
Zimbra: live server Installation
Zimbra is a open source mail server . we can install it on single server or multi server.
for install zimbra on multitier architecture, please follow bellow step:
[root@ldapserver ~]# hostname
ldapserver.example.com
[root@ldapserver ~]#
[root@ldapserver ~]#
[root@ldapserver ~]#
[root@ldapserver ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:B3:BE:1E
inet addr:10.0.2.137 Bcast:10.0.3.255 Mask:255.255.252.0
inet6 addr: fe80::20c:29ff:feb3:be1e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4884634 errors:0 dropped:0 overruns:0 frame:0
TX packets:246025 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1041439383 (993.1 MiB) TX bytes:17422429 (16.6 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1442 errors:0 dropped:0 overruns:0 frame:0
TX packets:1442 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1852574 (1.7 MiB) TX bytes:1852574 (1.7 MiB)
[root@ldapserver ~]# vi /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
10.0.2.137 ldapserver.example.com ldapserver
[root@localhost ~]# cd /opt/
[root@localhost opt]# ls
zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@localhost opt]# tar -xvf zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz
[root@ldapserver ~]# cd /opt/zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546
[root@ldapserver zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546]# ./install.sh
Do you agree with the terms of the software license agreement? [N] y
Checking for prerequisites...
FOUND: NPTL
FOUND: nc-1.10-22
FOUND: sudo-1.6.7p5-30.1.5
FOUND: libidn-0.5.6-1
FOUND: gmp-4.1.4-3
FOUND: compat-libstdc++-33-3.2.3-47.3
compat-libstdc++-33-3.2.3-47.3
FOUND: /usr/lib64/libstdc++.so.5
FOUND: /usr/lib64/libstdc++.so.6
Checking for suggested prerequisites...
FOUND: perl-5.8.5
MISSING: sysstat does not appear to be installed.
###WARNING###
The suggested version of one or more packages is not installed.
This could cause problems with the operation of Zimbra.
Do you wish to continue? [N] n
Exit? [N] y
Exiting.
[root@ldapserver ~]# yum install sysstat
Setting up Install Process
Setting up repositories
base 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for sysstat to pack into transaction set.
sysstat-5.0.5-25.el4.x86_ 100% |=========================| 15 kB 00:00
---> Package sysstat.x86_64 0:5.0.5-25.el4 set to be updated
--> Running transaction check
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
sysstat x86_64 5.0.5-25.el4 base 127 k
Transaction Summary
=============================================================================
Install 1 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 127 k
Is this ok [y/N]: y
Downloading Packages:
warning: rpmts_HdrFromFdno: V3 DSA signature: NOKEY, key ID 443e1821
Public key for sysstat-5.0.5-25.el4.x86_64.rpm is not installed
Retrieving GPG key from http://mirror.centos.org/centos/RPM-GPG-KEY-centos4
Importing GPG key 0x443E1821 "CentOS-4 key <centos-4key@centos.org>"
Is this ok [y/N]: y
Key imported successfully
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: sysstat ######################### [1/1]
Installed: sysstat.x86_64 0:5.0.5-25.el4
Complete!
ZCSLicense.xml zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546 zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@ldapserver opt]# cd zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546
[root@ldapserver zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546]#
[root@ldapserver zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546]# ./install.sh -l /opt/ZCSLicense.xml --platform-override
Do you agree with the terms of the software license agreement? [N] y
Checking for prerequisites...
FOUND: NPTL
FOUND: nc-1.10-22
FOUND: sudo-1.6.7p5-30.1.5
FOUND: libidn-0.5.6-1
FOUND: gmp-4.1.4-3
FOUND: compat-libstdc++-33-3.2.3-47.3
compat-libstdc++-33-3.2.3-47.3
FOUND: /usr/lib64/libstdc++.so.5
FOUND: /usr/lib64/libstdc++.so.6
Checking for suggested prerequisites...
FOUND: perl-5.8.5
FOUND: sysstat
Prerequisite check complete.
Checking for installable packages
Found zimbra-core
Found zimbra-ldap
Found zimbra-logger
Found zimbra-mta
Found zimbra-snmp
Found zimbra-store
Found zimbra-apache
Found zimbra-spell
Found zimbra-convertd
Found zimbra-memcached
Found zimbra-proxy
Found zimbra-archiving
Found zimbra-cluster
The Zimbra Collaboration Suite does not appear to be installed,
yet there appears to be a ZCS directory structure in /opt/zimbra.
Would you like to delete /opt/zimbra before installing? [N] y
Select the packages to install
Install zimbra-ldap [Y] y
Install zimbra-logger [Y] N
Install zimbra-mta [Y] N
Install zimbra-snmp [Y] N
Install zimbra-store [Y] N
Install zimbra-apache [Y] N
Install zimbra-spell [Y] N
Install zimbra-convertd [N] N
Install zimbra-memcached [N] N
Install zimbra-proxy [N] N
Checking required space for zimbra-core
Installing:
zimbra-core
zimbra-ldap
You appear to be installing packages on a platform different
than the platform for which they were built.
This platform is CentOS4_64
Packages found: RHEL4_64
This may or may not work.
Using packages for a platform in which they were not designed for
may result in an installation that is NOT usable. Your support
options may be limited if you choose to continue.
Install zimbra-proxy [N] N
Checking required space for zimbra-core
Installing:
zimbra-core
zimbra-ldap
You appear to be installing packages on a platform different
than the platform for which they were built.
This platform is CentOS4_64
Packages found: RHEL4_64
This may or may not work.
Using packages for a platform in which they were not designed for
may result in an installation that is NOT usable. Your support
options may be limited if you choose to continue.
Install anyway? [N] Y
The system will be modified. Continue? [N] Y
Shutting down zimbra mail
Removing existing packages
Removing deployed webapp directories
Removing /opt/zimbra
Removing zimbra crontab entry...done.
done.
Cleaning up zimbra init scripts...done.
Cleaning up /etc/ld.so.conf...done.
Cleaning up /etc/prelink.conf...done.
Cleaning up /etc/security/limits.conf...done.
Finished removing Zimbra Collaboration Suite.
Installing packages
zimbra-core......zimbra-core-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
zimbra-ldap......zimbra-ldap-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
Installing /opt/zimbra/conf/ZCSLicense.xml
Operations logged to /tmp/zmsetup.08202012-064115.log
Installing LDAP configuration database...done.
Setting defaults...
DNS ERROR resolving MX for ldapserver.example.com
It is suggested that the domain name have an MX record configured in DNS
Change domain name? [Yes]
Create domain: [ldapserver.example.com] example.com
DNS ERROR resolving MX for example.com
It is suggested that the domain name have an MX record configured in DNS
Re-Enter domain name? [Yes] no
done.
Checking for port conflicts
Main menu
1) Common Configuration:
2) zimbra-ldap: Enabled
3) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) 1
Common configuration
1) Hostname: ldapserver.example.com
2) Ldap master host: ldapserver.example.com
3) Ldap port: 389
4) Ldap Admin password: set
5) Secure interprocess communications: yes
6) TimeZone: Asia/Colombo
Select, or 'r' for previous menu [r] 4
Password for ldap admin user (min 6 characters): [MkhohA_p] Admin123
Common configuration
1) Hostname: ldapserver.example.com
2) Ldap master host: ldapserver.example.com
3) Ldap port: 389
4) Ldap Admin password: set
5) Secure interprocess communications: yes
6) TimeZone: Asia/Colombo
Select, or 'r' for previous menu [r]
Main menu
1) Common Configuration:
2) zimbra-ldap: Enabled
3) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) x
Main menu
1) Common Configuration:
+Hostname: ldapserver.example.com
+Ldap master host: ldapserver.example.com
+Ldap port: 389
+Ldap Admin password: set
+Secure interprocess communications: yes
+TimeZone: Asia/Colombo
2) zimbra-ldap: Enabled
+Create Domain: yes
+Domain to create: example.com
+Ldap root password: set
+Ldap replication password: set
+Ldap postfix password: set
+Ldap amavis password: set
+Ldap nginx password: set
+Ldap Bes Searcher password: set
3) Enable default backup schedule: yes
c) Collapse menu
r) Start servers after configuration yes
s) Save config to file
q) Quit
*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) 2
Ldap configuration
1) Status: Enabled
2) Create Domain: yes
3) Domain to create: example.com
4) Ldap root password: set
5) Ldap replication password: set
6) Ldap postfix password: set
7) Ldap amavis password: set
8) Ldap nginx password: set
9) Ldap Bes Searcher password: set
Select, or 'r' for previous menu [r] 4
Password for ldap root user (min 6 characters): [MkhohA_p] Admin123
Ldap configuration
1) Status: Enabled
2) Create Domain: yes
3) Domain to create: example.com
4) Ldap root password: set
5) Ldap replication password: set
6) Ldap postfix password: set
7) Ldap amavis password: set
8) Ldap nginx password: set
9) Ldap Bes Searcher password: set
Select, or 'r' for previous menu [r] 5
Password for ldap replication user (min 6 characters): [MkhohA_p] Admin123
Ldap configuration
1) Status: Enabled
2) Create Domain: yes
3) Domain to create: example.com
4) Ldap root password: set
5) Ldap replication password: set
6) Ldap postfix password: set
7) Ldap amavis password: set
8) Ldap nginx password: set
9) Ldap Bes Searcher password: set
Select, or 'r' for previous menu [r] 6
Password for ldap Postfix user (min 6 characters): [MkhohA_p] Admin123
Ldap configuration
1) Status: Enabled
2) Create Domain: yes
3) Domain to create: example.com
4) Ldap root password: set
5) Ldap replication password: set
6) Ldap postfix password: set
7) Ldap amavis password: set
8) Ldap nginx password: set
9) Ldap Bes Searcher password: set
Select, or 'r' for previous menu [r] 7
Password for ldap Amavis user (min 6 characters): [MkhohA_p] Admin123
Ldap configuration
1) Status: Enabled
2) Create Domain: yes
3) Domain to create: example.com
4) Ldap root password: set
5) Ldap replication password: set
6) Ldap postfix password: set
7) Ldap amavis password: set
8) Ldap nginx password: set
9) Ldap Bes Searcher password: set
Select, or 'r' for previous menu [r] 8
Password for ldap Nginx user (min 6 characters): [MkhohA_p] Admin123
Ldap configuration
1) Status: Enabled
2) Create Domain: yes
3) Domain to create: example.com
4) Ldap root password: set
5) Ldap replication password: set
6) Ldap postfix password: set
7) Ldap amavis password: set
8) Ldap nginx password: set
9) Ldap Bes Searcher password: set
Select, or 'r' for previous menu [r] 9
Password for ldap BES user (min 6 characters): [MkhohA_p] Admin123
Ldap configuration
1) Status: Enabled
2) Create Domain: yes
3) Domain to create: example.com
4) Ldap root password: set
5) Ldap replication password: set
6) Ldap postfix password: set
7) Ldap amavis password: set
8) Ldap nginx password: set
9) Ldap Bes Searcher password: set
Select, or 'r' for previous menu [r]
Main menu
1) Common Configuration:
+Hostname: ldapserver.example.com
+Ldap master host: ldapserver.example.com
+Ldap port: 389
+Ldap Admin password: set
+Secure interprocess communications: yes
+TimeZone: Asia/Colombo
2) zimbra-ldap: Enabled
+Create Domain: yes
+Domain to create: example.com
+Ldap root password: set
+Ldap replication password: set
+Ldap postfix password: set
+Ldap amavis password: set
+Ldap nginx password: set
+Ldap Bes Searcher password: set
3) Enable default backup schedule: yes
c) Collapse menu
r) Start servers after configuration yes
s) Save config to file
q) Quit
*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) a
Save configuration data to a file? [Yes]
Save config in file: [/opt/zimbra/config.29368]
Saving config in /opt/zimbra/config.29368...done.
The system will be modified - continue? [No] yes
Operations logged to /tmp/zmsetup.08202012-064115.log
Setting local config values...done.
Setting up CA...done.
Deploying CA to /opt/zimbra/conf/ca ...done.
Creating SSL certificate...done.
Installing LDAP SSL certificate...done.
Initializing ldap...done.
Setting replication password...done.
Setting Postfix password...done.
Setting amavis password...done.
Setting nginx password...done.
Setting BES searcher password...done.
Creating server entry for ldapserver.example.com...done.
Saving CA in ldap ...done.
Saving SSL Certificate in ldap ...done.
Setting TimeZone Preference...done.
Setting services on ldapserver.example.com...done.
Creating domain example.com...done.
Setting default domain name...done.
Setting up default domain admin UI components..done.
Granting group zimbraDomainAdmins@example.com domain right +domainAdminConsoleRights on example.com...done.
Granting group zimbraDomainAdmins@example.com global right +domainAdminZimletRights...done.
Setting up global distribution list admin UI components..done.
Granting group zimbraDLAdmins@example.com global right +adminConsoleDLRights...done.
Granting group zimbraDLAdmins@example.com global right +listAccount...done.
Setting up syslog.conf...done.
Setting default backup schedule...Done
Starting servers...done.
Setting up zimbra crontab...done.
Moving /tmp/zmsetup.08202012-064115.log to /opt/zimbra/log
Configuration complete - press return to exit
[root@ldapserver zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546]#
[root@ldapserver zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546]# su - zimbra
[zimbra@ldapserver ~]$ zmcontrol status
Host ldapserver.example.com
ldap Running
stats Running
zmconfigd Running
[zimbra@ldapserver ~]$ zmcontrol restart
Host ldapserver.example.com
Stopping zmconfigd...Done.
Stopping stats...Done.
Stopping spell...Done.
Stopping snmp...Done.
Stopping cbpolicyd...Done.
Stopping archiving...Done.
Stopping antivirus...Done.
Stopping antispam...Done.
Stopping imapproxy...Done.
Stopping memcached...Done.
Stopping mailbox...Done.
Stopping logger...Done.
Stopping ldap...Done.
Host ldapserver.example.com
Starting ldap...Done.
Starting zmconfigd...Done.
Starting stats...Done.
[zimbra@ldapserver ~]$ zmcontrol status
Host ldapserver.example.com
ldap Running
stats Running
zmconfigd Running
############ LDAP INSTALLATIOn Completion#########################
############ First MBS server INSTALLATION##########################
[root@bvea33101 opt]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:99:CF:90
inet addr:10.0.2.105 Bcast:10.0.3.255 Mask:255.255.252.0
inet6 addr: fe80::20c:29ff:fe99:cf90/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5122220 errors:0 dropped:0 overruns:0 frame:0
TX packets:239645 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1059914218 (1010.8 MiB) TX bytes:17212190 (16.4 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1292 errors:0 dropped:0 overruns:0 frame:0
TX packets:1292 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1318816 (1.2 MiB) TX bytes:1318816 (1.2 MiB)
[root@bvea33101 opt]# hostname
mbs1server.example.com
[root@bvea33101 opt]# vi /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
10.0.2.105 mbs1server.example.com bvea33101
10.0.2.137 ldapserver.example.com ldapserver
:wq!
[root@bvea33101 opt]# mount /dev/cdrom /mnt
mount: block device /dev/cdrom is write-protected, mounting read-only
[root@bvea33101 opt]# cd /etc/yum.repos.d/
[root@bvea33101 yum.repos.d]# ls
CentOS-Base.repo CentOS-Media.repo
[root@bvea33101 yum.repos.d]# cp -p CentOS-Base.repo CentOS-Base.repo.bak
[root@bvea33101 yum.repos.d]# vi CentOS-Base.repo
[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
baseurl=file:///mnt
gpgcheck=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4
priority=1
protect=1
:wq!
[root@bvea33101 ~]# yum install sysstat
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for sysstat to pack into transaction set.
sysstat-5.0.5-25.el4.x86_ 100% |=========================| 15 kB 00:00
---> Package sysstat.x86_64 0:5.0.5-25.el4 set to be updated
--> Running transaction check
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
sysstat x86_64 5.0.5-25.el4 base 127 k
Transaction Summary
=============================================================================
Install 1 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 127 k
Is this ok [y/N]: y
Downloading Packages:
warning: rpmts_HdrFromFdno: V3 DSA signature: NOKEY, key ID 443e1821
Public key for sysstat-5.0.5-25.el4.x86_64.rpm is not installed
Retrieving GPG key from http://mirror.centos.org/centos/RPM-GPG-KEY-centos4
Importing GPG key 0x443E1821 "CentOS-4 key <centos-4key@centos.org>"
Is this ok [y/N]: y
Key imported successfully
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: sysstat ######################### [1/1]
Installed: sysstat.x86_64 0:5.0.5-25.el4
Complete!
[root@bvea33101 ~]#
[root@bvea33101 ~]# cd /opt/
[root@bvea33101 opt]# ls
zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@bvea33101 opt]# tar -zxvf zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz
[root@bvea33101 opt]# ls
zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546 zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@bvea33101 opt]#
[root@bvea33101 opt]# cd zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546
[root@bvea33101 zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546]# ./install.sh -l /opt/ZCSLicense.xml --platform-override
Do you agree with the terms of the software license agreement? [N] y
Checking for prerequisites...
FOUND: NPTL
FOUND: nc-1.10-22
FOUND: sudo-1.6.7p5-30.1.5
FOUND: libidn-0.5.6-1
FOUND: gmp-4.1.4-3
FOUND: compat-libstdc++-33-3.2.3-47.3
compat-libstdc++-33-3.2.3-47.3
FOUND: /usr/lib64/libstdc++.so.5
FOUND: /usr/lib64/libstdc++.so.6
Checking for suggested prerequisites...
FOUND: perl-5.8.5
FOUND: sysstat
Prerequisite check complete.
Checking for installable packages
Found zimbra-core
Found zimbra-ldap
Found zimbra-logger
Found zimbra-mta
Found zimbra-snmp
Found zimbra-store
Found zimbra-apache
Found zimbra-spell
Found zimbra-convertd
Found zimbra-memcached
Found zimbra-proxy
Found zimbra-archiving
Found zimbra-cluster
The Zimbra Collaboration Suite does not appear to be installed,
yet there appears to be a ZCS directory structure in /opt/zimbra.
Would you like to delete /opt/zimbra before installing? [N] y
Select the packages to install
Install zimbra-ldap [Y] n
Install zimbra-logger [Y] y
Install zimbra-mta [Y] n
Install zimbra-snmp [Y] n
Install zimbra-store [Y] y
Install zimbra-apache [Y] y
Install zimbra-spell [Y] y
Install zimbra-convertd [Y] n
Install zimbra-memcached [N] n
Install zimbra-proxy [N]
Install zimbra-archiving [N]
Checking required space for zimbra-core
checking space for zimbra-store
Installing:
zimbra-core
zimbra-logger
zimbra-store
zimbra-apache
zimbra-spell
You appear to be installing packages on a platform different
than the platform for which they were built.
This platform is CentOS4_64
Packages found: RHEL4_64
This may or may not work.
Using packages for a platform in which they were not designed for
may result in an installation that is NOT usable. Your support
options may be limited if you choose to continue.
Install anyway? [N] y
The system will be modified. Continue? [N] y
Shutting down zimbra mail
Removing existing packages
Removing deployed webapp directories
Removing /opt/zimbra
Removing zimbra crontab entry...done.
done.
Cleaning up zimbra init scripts...done.
Cleaning up /etc/ld.so.conf...done.
Cleaning up /etc/prelink.conf...done.
Cleaning up /etc/security/limits.conf...done.
Finished removing Zimbra Collaboration Suite.
Installing packages
zimbra-core......zimbra-core-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
zimbra-logger......zimbra-logger-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
zimbra-store......zimbra-store-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
zimbra-apache......zimbra-apache-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
zimbra-spell......zimbra-spell-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
Installing /opt/zimbra/conf/ZCSLicense.xml
Operations logged to /tmp/zmsetup.08202012-074938.log
Setting defaults...done.
Checking for port conflicts
Main menu
1) Common Configuration:
+Hostname: mbs1server.example.com
******* +Ldap master host: UNSET
+Ldap port: 389
******* +Ldap Admin password: UNSET
+LDAP Base DN: cn=zimbra
+Secure interprocess communications: yes
+TimeZone: Asia/Colombo
2) zimbra-store: Enabled
+Create Admin User: yes
+Admin user to create: admin@mbs1server.example.com
******* +Admin Password UNSET
+Anti-virus quarantine user: virus-quarantine.zyzyh0ofsq@mbs1server.example.com
+Enable automated spam training: yes
+Spam training user: spam.9kxuakmn3x@mbs1server.example.com
+Non-spam(Ham) training user: ham.ubogjabqp@mbs1server.example.com
******* +SMTP host: UNSET
+Web server HTTP port: 80
+Web server HTTPS port: 443
+Web server mode: http
+IMAP server port: 143
+IMAP server SSL port: 993
+POP server port: 110
+POP server SSL port: 995
+Use spell check server: yes
+Spell server URL: http://mbs1server.example.com:7780/aspell.php
+Configure for use with mail proxy: FALSE
+Configure for use with web proxy: FALSE
+Enable version update checks: TRUE
+Enable version update notifications: TRUE
+Version update notification email: admin@mbs1server.example.com
+Version update source email: admin@mbs1server.example.com
3) zimbra-logger: Enabled
4) zimbra-spell: Enabled
5) Default Class of Service Configuration:
6) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
Address unconfigured (**) items (? - help) 1
Common configuration
1) Hostname: mbs1server.example.com
** 2) Ldap master host: UNSET
3) Ldap port: 389
** 4) Ldap Admin password: UNSET
5) LDAP Base DN: cn=zimbra
6) Secure interprocess communications: yes
7) TimeZone: Asia/Colombo
Select, or 'r' for previous menu [r] 2
Please enter the ldap server hostname: ldapserver.example.com
Common configuration
1) Hostname: mbs1server.example.com
2) Ldap master host: ldapserver.example.com
3) Ldap port: 389
** 4) Ldap Admin password: UNSET
5) LDAP Base DN: cn=zimbra
6) Secure interprocess communications: yes
7) TimeZone: Asia/Colombo
Select, or 'r' for previous menu [r] 4
Password for ldap admin user (min 6 characters): Admin123
Setting defaults from ldap...done.
Common configuration
1) Hostname: mbs1server.example.com
2) Ldap master host: ldapserver.example.com
3) Ldap port: 389
4) Ldap Admin password: set
5) LDAP Base DN: cn=zimbra
6) Secure interprocess communications: yes
7) TimeZone: Asia/Colombo
Select, or 'r' for previous menu [r] r
Main menu
1) Common Configuration:
2) zimbra-store: Enabled
+Create Admin User: yes
+Admin user to create: admin@example.com
******* +Admin Password UNSET
+Anti-virus quarantine user: virus-quarantine.h9tj_ysnib@example.com
+Enable automated spam training: yes
+Spam training user: spam.caz5tukxm@example.com
+Non-spam(Ham) training user: ham.tpp_fvgm@example.com
******* +SMTP host: UNSET
+Web server HTTP port: 80
+Web server HTTPS port: 443
+Web server mode: http
+IMAP server port: 143
+IMAP server SSL port: 993
+POP server port: 110
+POP server SSL port: 995
+Use spell check server: yes
+Spell server URL: http://mbs1server.example.com:7780/aspell.php
+Configure for use with mail proxy: FALSE
+Configure for use with web proxy: FALSE
+Enable version update checks: TRUE
+Enable version update notifications: TRUE
+Version update notification email: admin@example.com
+Version update source email: admin@example.com
3) zimbra-logger: Enabled
4) zimbra-spell: Enabled
5) Default Class of Service Configuration:
6) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
Address unconfigured (**) items (? - help) 2
Store configuration
1) Status: Enabled
2) Create Admin User: yes
3) Admin user to create: admin@example.com
** 4) Admin Password UNSET
5) Anti-virus quarantine user: virus-quarantine.h9tj_ysnib@example.com
6) Enable automated spam training: yes
7) Spam training user: spam.caz5tukxm@example.com
8) Non-spam(Ham) training user: ham.tpp_fvgm@example.com
** 9) SMTP host: UNSET
10) Web server HTTP port: 80
11) Web server HTTPS port: 443
12) Web server mode: http
13) IMAP server port: 143
14) IMAP server SSL port: 993
15) POP server port: 110
16) POP server SSL port: 995
17) Use spell check server: yes
18) Spell server URL: http://mbs1server.example.com:7780/aspell.php
19) Configure for use with mail proxy: FALSE
20) Configure for use with web proxy: FALSE
21) Enable version update checks: TRUE
22) Enable version update notifications: TRUE
23) Version update notification email: admin@example.com
24) Version update source email: admin@example.com
Select, or 'r' for previous menu [r] 4
Password for admin@example.com (min 6 characters): [ZBIwDetuK_] Admin123
Store configuration
1) Status: Enabled
2) Create Admin User: yes
3) Admin user to create: admin@example.com
4) Admin Password set
5) Anti-virus quarantine user: virus-quarantine.h9tj_ysnib@example.com
6) Enable automated spam training: yes
7) Spam training user: spam.caz5tukxm@example.com
8) Non-spam(Ham) training user: ham.tpp_fvgm@example.com
** 9) SMTP host: UNSET
10) Web server HTTP port: 80
11) Web server HTTPS port: 443
12) Web server mode: http
13) IMAP server port: 143
14) IMAP server SSL port: 993
15) POP server port: 110
16) POP server SSL port: 995
17) Use spell check server: yes
18) Spell server URL: http://mbs1server.example.com:7780/aspell.php
19) Configure for use with mail proxy: FALSE
20) Configure for use with web proxy: FALSE
21) Enable version update checks: TRUE
22) Enable version update notifications: TRUE
23) Version update notification email: admin@example.com
24) Version update source email: admin@example.com
Select, or 'r' for previous menu [r] 9
Please enter the SMTP server hostname: mtaserver.example.com
Store configuration
1) Status: Enabled
2) Create Admin User: yes
3) Admin user to create: admin@example.com
4) Admin Password set
5) Anti-virus quarantine user: virus-quarantine.h9tj_ysnib@example.com
6) Enable automated spam training: yes
7) Spam training user: spam.caz5tukxm@example.com
8) Non-spam(Ham) training user: ham.tpp_fvgm@example.com
9) SMTP host: mtaserver.example.com
10) Web server HTTP port: 80
11) Web server HTTPS port: 443
12) Web server mode: http
13) IMAP server port: 143
14) IMAP server SSL port: 993
15) POP server port: 110
16) POP server SSL port: 995
17) Use spell check server: yes
18) Spell server URL: http://mbs1server.example.com:7780/aspell.php
19) Configure for use with mail proxy: FALSE
20) Configure for use with web proxy: FALSE
21) Enable version update checks: TRUE
22) Enable version update notifications: TRUE
23) Version update notification email: admin@example.com
24) Version update source email: admin@example.com
Select, or 'r' for previous menu [r] r
Select, or 'r' for previous menu [r] r
Main menu
1) Common Configuration:
2) zimbra-store: Enabled
3) zimbra-logger: Enabled
4) zimbra-spell: Enabled
5) Default Class of Service Configuration:
6) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) x
Main menu
1) Common Configuration:
+Hostname: mbs1server.example.com
+Ldap master host: ldapserver.example.com
+Ldap port: 389
+Ldap Admin password: set
+LDAP Base DN: cn=zimbra
+Secure interprocess communications: yes
+TimeZone: Asia/Colombo
2) zimbra-store: Enabled
+Create Admin User: yes
+Admin user to create: admin@example.com
+Admin Password set
+Anti-virus quarantine user: virus-quarantine.h9tj_ysnib@example.com
+Enable automated spam training: yes
+Spam training user: spam.caz5tukxm@example.com
+Non-spam(Ham) training user: ham.tpp_fvgm@example.com
+SMTP host: mtaserver.example.com
+Web server HTTP port: 80
+Web server HTTPS port: 443
+Web server mode: http
+IMAP server port: 143
+IMAP server SSL port: 993
+POP server port: 110
+POP server SSL port: 995
+Use spell check server: yes
+Spell server URL: http://mbs1server.example.com:7780/aspell.php
+Configure for use with mail proxy: FALSE
+Configure for use with web proxy: FALSE
+Enable version update checks: TRUE
+Enable version update notifications: TRUE
+Version update notification email: admin@example.com
+Version update source email: admin@example.com
3) zimbra-logger: Enabled
4) zimbra-spell: Enabled
5) Default Class of Service Configuration:
+Enable Briefcases Feature: Enabled
+Enable Tasks Feature: Enabled
6) Enable default backup schedule: yes
c) Collapse menu
r) Start servers after configuration yes
s) Save config to file
q) Quit
*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) a
Save configuration data to a file? [Yes]
Save config in file: [/opt/zimbra/config.30838]
Saving config in /opt/zimbra/config.30838...done.
The system will be modified - continue? [No] yes
Operations logged to /tmp/zmsetup.08202012-074938.log
Setting local config values...done.
Updating ldap_root_password and zimbra_ldap_password...done.
Setting up CA...done.
Deploying CA to /opt/zimbra/conf/ca ...done.
Creating SSL certificate...done.
Installing mailboxd SSL certificates...done.
Creating server entry for mbs1server.example.com...done.
Saving CA in ldap ...done.
Saving SSL Certificate in ldap ...done.
Setting spell check URL...done.
Setting service ports on mbs1server.example.com...done.
Adding mbs1server.example.com to zimbraMailHostPool in default COS...done.
Installing webclient skins...
sky...done.
lemongrass...done.
hotrod...done.
bare...done.
carbon...done.
lake...done.
sand...done.
bones...done.
steel...done.
twilight...done.
smoke...done.
oasis...done.
waves...done.
tree...done.
pebble...done.
lavender...done.
beach...done.
Finished installing webclient skins.
Setting zimbraFeatureTasksEnabled=TRUE...done.
Setting zimbraFeatureBriefcasesEnabled=TRUE...done.
Setting services on mbs1server.example.com...done.
Creating domain example.com...already exists.
Creating admin account admin@example.com...done.
Creating root alias...done.
Creating postmaster alias...done.
Creating user spam.caz5tukxm@example.com...done.
Creating user ham.tpp_fvgm@example.com...done.
Creating user virus-quarantine.h9tj_ysnib@example.com...done.
Setting spam training and Anti-virus quarantine accounts...done.
Initializing store sql database...done.
Setting zimbraSmtpHostname for mbs1server.example.com...done.
Checking for default IM conference room...not present.
Initializing default IM conference room...done.
Setting up syslog.conf...done.
Setting default backup schedule...Done
Looking for valid license to install...license installed.
Starting servers...done.
Installing common zimlets...
com_zimbra_bulkprovision...done.
com_zimbra_webex...done.
com_zimbra_attachmail...done.
com_zimbra_linkedin...done.
com_zimbra_adminversioncheck...done.
com_zimbra_srchhighlighter...done.
com_zimbra_phone...done.
com_zimbra_cert_manager...done.
com_zimbra_url...done.
com_zimbra_attachcontacts...done.
com_zimbra_email...done.
com_zimbra_date...done.
com_zimbra_dnd...done.
com_zimbra_social...done.
Finished installing common zimlets.
Installing network zimlets...
com_zimbra_mobilesync...done.
com_zimbra_backuprestore...done.
com_zimbra_convertd...done.
com_zimbra_hsm...done.
com_zimbra_delegatedadmin...done.
com_zimbra_license...done.
com_zimbra_smime...done.
Finished installing network zimlets.
Restarting mailboxd...done.
Setting up zimbra crontab...done.
Moving /tmp/zmsetup.08202012-074938.log to /opt/zimbra/log
Configuration complete - press return to exit
[root@bvea33101 zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546]# su - zimbra
[zimbra@bvea33101 ~]$ zmcontrol restart
Host mbs1server.example.com
Stopping zmconfigd...Done.
Stopping stats...Done.
Stopping spell...Done.
Stopping snmp...Done.
Stopping cbpolicyd...Done.
Stopping archiving...Done.
Stopping antivirus...Done.
Stopping antispam...Done.
Stopping imapproxy...Done.
Stopping memcached...Done.
Stopping mailbox...Done.
Stopping logger...Done.
Host mbs1server.example.com
Starting zmconfigd...Done.
Starting logger...Done.
Starting mailbox...Done.
Starting spell...Done.
Starting stats...Done.
[zimbra@bvea33101 ~]$ zmcontrol status
Host mbs1server.example.com
logger Running
mailbox Running
spell Running
stats Running
zmconfigd Running
[zimbra@bvea33101 ~]$
#####################installation completed of MBS 1 Server######################
#####################installtion start of MBS2#################################
[root@bvea33102 ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:91:AF:31
inet addr:10.0.2.149 Bcast:10.0.3.255 Mask:255.255.252.0
inet6 addr: fe80::20c:29ff:fe91:af31/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5146178 errors:0 dropped:0 overruns:0 frame:0
TX packets:239119 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1061739405 (1012.5 MiB) TX bytes:16576133 (15.8 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1204 errors:0 dropped:0 overruns:0 frame:0
TX packets:1204 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1303494 (1.2 MiB) TX bytes:1303494 (1.2 MiB)
[root@bvea33102 ~]# hostname
mbs2server.example.com
[root@bvea33102 ~]# vi /etc/hosts
127.0.0.1 localhost.localdomain localhost
10.0.2.137 ldapserver.example.com ldapserver
10.0.2.105 bcea33101.example.com bvea33101
10.0.2.149 mbs2server.example.com bvea33102
:wq!
[root@bvea33102 ~]# mount /dev/cdrom /mnt
mount: block device /dev/cdrom is write-protected, mounting read-only
[root@bvea33102 ~]#
[root@bvea33102 ~]# mount /dev/cdrom /mnt
mount: block device /dev/cdrom is write-protected, mounting read-only
[root@bvea33102 ~]# cd /etc/yum.repos.d/
[root@bvea33102 yum.repos.d]# ls
CentOS-Base.repo CentOS-Media.repo
[root@bvea33102 yum.repos.d]# cp -p CentOS-Base.repo CentOS-Base.repo.bak
[root@bvea33102 yum.repos.d]# ls
CentOS-Base.repo CentOS-Base.repo.bak CentOS-Media.repo
[root@bvea33102 yum.repos.d]# vi CentOS-Base.repo
[root@bvea33102 yum.repos.d]# yum clean all
Cleaning up Everything
0 headers removed
0 packages removed
0 metadata files removed
0 cache files removed
0 cache files removed
[root@bvea33102 yum.repos.d]# yum list all
[root@bvea33102 yum.repos.d]#
[root@bvea33102 yum.repos.d]# yum install sysstat
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for sysstat to pack into transaction set.
sysstat-5.0.5-25.el4.x86_ 100% |=========================| 15 kB 00:00
---> Package sysstat.x86_64 0:5.0.5-25.el4 set to be updated
--> Running transaction check
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
sysstat x86_64 5.0.5-25.el4 base 127 k
Transaction Summary
=============================================================================
Install 1 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 127 k
Is this ok [y/N]: y
Downloading Packages:
warning: rpmts_HdrFromFdno: V3 DSA signature: NOKEY, key ID 443e1821
Public key for sysstat-5.0.5-25.el4.x86_64.rpm is not installed
Retrieving GPG key from http://mirror.centos.org/centos/RPM-GPG-KEY-centos4
Importing GPG key 0x443E1821 "CentOS-4 key <centos-4key@centos.org>"
Is this ok [y/N]: y
Key imported successfully
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: sysstat ######################### [1/1]
Installed: sysstat.x86_64 0:5.0.5-25.el4
Complete!
[root@bvea33102 ~]# cd /opt/
[root@bvea33102 opt]# ls
ZCSLicense.xml zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@bvea33102 opt]# tar -zxvf zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz
##################################Proxy server installation##########################
[root@bvea33103 ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:A7:E4:2B
inet addr:10.0.2.146 Bcast:10.0.3.255 Mask:255.255.252.0
inet6 addr: fe80::20c:29ff:fea7:e42b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4757723 errors:0 dropped:0 overruns:0 frame:0
TX packets:22493 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:376890100 (359.4 MiB) TX bytes:2091154 (1.9 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1238 errors:0 dropped:0 overruns:0 frame:0
TX packets:1238 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1336915 (1.2 MiB) TX bytes:1336915 (1.2 MiB)
[root@bvea33103 ~]# hostname
mtaserver.example.com
[root@bvea33103 ~]# vi /etc/hosts
127.0.0.1 localhost.localdomain localhost
10.0.2.137 ldapserver.example.com ldapserver
10.0.2.105 bcea33101.example.com bvea33101
10.0.2.149 mbs2server.example.com bvea33102
10.0.2.146 mtaserver.example.com bvea33103
:wq!
[root@bvea33103 ~]# service sendmail stop
Shutting down sm-client: [ OK ]
Shutting down sendmail: [ OK ]
[root@bvea33103 ~]# chkconfig sendmail off
[root@bvea33103 ~]#
[root@bvea33103 ~]# mount /dev/cdrom /mnt
mount: block device /dev/cdrom is write-protected, mounting read-only
[root@bvea33103 yum.repos.d]#
[root@bvea33103 yum.repos.d]# ls
CentOS-Base.repo CentOS-Base.repo.bak CentOS-Media.repo
[root@bvea33103 yum.repos.d]# ls
CentOS-Base.repo CentOS-Base.repo.bak CentOS-Media.repo
[root@bvea33103 yum.repos.d]#
[root@bvea33103 yum.repos.d]# cd
[root@bvea33103 ~]# yum install sysstat
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for sysstat to pack into transaction set.
sysstat-5.0.5-25.el4.x86_ 100% |=========================| 15 kB 00:00
---> Package sysstat.x86_64 0:5.0.5-25.el4 set to be updated
--> Running transaction check
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
sysstat x86_64 5.0.5-25.el4 base 127 k
Transaction Summary
=============================================================================
Install 1 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 127 k
Is this ok [y/N]: y
Downloading Packages:
warning: rpmts_HdrFromFdno: V3 DSA signature: NOKEY, key ID 443e1821
Public key for sysstat-5.0.5-25.el4.x86_64.rpm is not installed
Retrieving GPG key from http://mirror.centos.org/centos/RPM-GPG-KEY-centos4
Importing GPG key 0x443E1821 "CentOS-4 key <centos-4key@centos.org>"
Is this ok [y/N]: y
Key imported successfully
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: sysstat ######################### [1/1]
Installed: sysstat.x86_64 0:5.0.5-25.el4
Complete!
[root@bvea33103 ~]#
[root@bvea33103 opt]# ls
ZCSLicense.xml zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@bvea33103 opt]# ls
ZCSLicense.xml zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@bvea33103 opt]#
[root@bvea33103 opt]# ls
ZCSLicense.xml zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@bvea33103 opt]# ls
ZCSLicense.xml zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@bvea33103 opt]# tar -zxvf zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz
[root@bvea33101 opt]# ls
zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546 zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546.tgz zimbra
[root@bvea33101 opt]#
[root@bvea33101 opt]# cd zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546
[root@bvea33101 zcs-NETWORK-7.1.3_GA_3346.RHEL4_64.20110928111546]# ./install.sh -l /opt/ZCSLicense.xml --platform-override
Do you agree with the terms of the software license agreement? [N] y
Checking for prerequisites...
FOUND: NPTL
FOUND: nc-1.10-22
FOUND: sudo-1.6.7p5-30.1.5
FOUND: libidn-0.5.6-1
FOUND: gmp-4.1.4-3
FOUND: compat-libstdc++-33-3.2.3-47.3
compat-libstdc++-33-3.2.3-47.3
FOUND: /usr/lib64/libstdc++.so.5
FOUND: /usr/lib64/libstdc++.so.6
Checking for suggested prerequisites...
FOUND: perl-5.8.5
FOUND: sysstat
Prerequisite check complete.
Checking for installable packages
Found zimbra-core
Found zimbra-ldap
Found zimbra-logger
Found zimbra-mta
Found zimbra-snmp
Found zimbra-store
Found zimbra-apache
Found zimbra-spell
Found zimbra-convertd
Found zimbra-memcached
Found zimbra-proxy
Found zimbra-archiving
Found zimbra-cluster
The Zimbra Collaboration Suite does not appear to be installed,
yet there appears to be a ZCS directory structure in /opt/zimbra.
Would you like to delete /opt/zimbra before installing? [N] y
Select the packages to install
Install zimbra-ldap [Y] n
Install zimbra-logger [Y] n
Install zimbra-mta [Y] y
Install zimbra-snmp [Y] n
Install zimbra-store [Y] n
Install zimbra-apache [Y] n
Install zimbra-spell [Y] n
Install zimbra-convertd [N] n
Install zimbra-memcached [N] y
Install zimbra-proxy [N] y
Checking required space for zimbra-core
Installing:
zimbra-core
zimbra-mta
zimbra-memcached
zimbra-proxy
You appear to be installing packages on a platform different
than the platform for which they were built.
This platform is CentOS4_64
Packages found: RHEL4_64
This may or may not work.
Using packages for a platform in which they were not designed for
may result in an installation that is NOT usable. Your support
options may be limited if you choose to continue.
Install anyway? [N] y
The system will be modified. Continue? [N] y
Shutting down zimbra mail
Removing existing packages
Removing deployed webapp directories
Removing /opt/zimbra
Removing zimbra crontab entry...done.
done.
Cleaning up zimbra init scripts...done.
Cleaning up /etc/ld.so.conf...done.
Cleaning up /etc/prelink.conf...done.
Cleaning up /etc/security/limits.conf...done.
Finished removing Zimbra Collaboration Suite.
Installing packages
zimbra-core......zimbra-core-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
zimbra-mta......zimbra-mta-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
zimbra-memcached......zimbra-memcached-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
zimbra-proxy......zimbra-proxy-7.1.3_GA_3346.RHEL4_64-20110928111546.x86_64.rpm...done
Installing /opt/zimbra/conf/ZCSLicense.xml
Operations logged to /tmp/zmsetup.08202012-095810.log
Setting defaults...done.
Checking for port conflicts
Port conflict detected: 25 (zimbra-mta)
Port conflicts detected! - Any key to continue
Main menu
1) Common Configuration:
+Hostname: mtaserver.example.com
******* +Ldap master host: UNSET
+Ldap port: 389
******* +Ldap Admin password: UNSET
+LDAP Base DN: cn=zimbra
+Secure interprocess communications: yes
+TimeZone: Asia/Colombo
2) zimbra-mta: Enabled
******* +MTA Auth host: UNSET
+Enable Spamassassin: yes
+Enable Clam AV: yes
+Notification address for AV alerts: admin@mtaserver.example.com
******* +Bind password for postfix ldap user: UNSET
******* +Bind password for amavis ldap user: UNSET
3) zimbra-proxy: Enabled
4) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
Address unconfigured (**) items (? - help) 1
Common configuration
1) Hostname: mtaserver.example.com
** 2) Ldap master host: UNSET
3) Ldap port: 389
** 4) Ldap Admin password: UNSET
5) LDAP Base DN: cn=zimbra
6) Secure interprocess communications: yes
7) TimeZone: Asia/Colombo
Select, or 'r' for previous menu [r] 2
Please enter the ldap server hostname: ldapserver
Common configuration
1) Hostname: mtaserver.example.com
2) Ldap master host: ldapserver
3) Ldap port: 389
** 4) Ldap Admin password: UNSET
5) LDAP Base DN: cn=zimbra
6) Secure interprocess communications: yes
7) TimeZone: Asia/Colombo
Select, or 'r' for previous menu [r] 4
Password for ldap admin user (min 6 characters): Admin123
Setting defaults from ldap...done.
Common configuration
1) Hostname: mtaserver.example.com
2) Ldap master host: ldapserver
3) Ldap port: 389
4) Ldap Admin password: set
5) LDAP Base DN: cn=zimbra
6) Secure interprocess communications: yes
7) TimeZone: Asia/Colombo
Select, or 'r' for previous menu [r]
Main menu
1) Common Configuration:
+Hostname: mtaserver.example.com
+Ldap master host: ldapserver
+Ldap port: 389
+Ldap Admin password: set
+LDAP Base DN: cn=zimbra
+Secure interprocess communications: yes
+TimeZone: Asia/Colombo
2) zimbra-mta: Enabled
******* +MTA Auth host: UNSET
+Enable Spamassassin: yes
+Enable Clam AV: yes
+Notification address for AV alerts: admin@mtaserver.example.com
******* +Bind password for postfix ldap user: UNSET
******* +Bind password for amavis ldap user: UNSET
3) zimbra-proxy: Enabled
+Enable POP/IMAP Proxy: TRUE
+IMAP server port: 7143
+IMAP server SSL port: 7993
+IMAP proxy port: 143
+IMAP SSL proxy port: 993
+POP server port: 7110
+POP server SSL port: 7995
+POP proxy port: 110
+POP SSL proxy port: 995
******* +Bind password for nginx ldap user: Not Verified
+Enable HTTP[S] Proxy: FALSE
4) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
Address unconfigured (**) items (? - help) 2
Mta configuration
1) Status: Enabled
** 2) MTA Auth host: UNSET
3) Enable Spamassassin: yes
4) Enable Clam AV: yes
5) Notification address for AV alerts: admin@mtaserver.example.com
** 6) Bind password for postfix ldap user: UNSET
** 7) Bind password for amavis ldap user: UNSET
Select, or 'r' for previous menu [r] 2
Please enter the mta authentication server hostname: bvea33103
Mta configuration
1) Status: Enabled
2) MTA Auth host: bvea33103
3) Enable Spamassassin: yes
4) Enable Clam AV: yes
5) Notification address for AV alerts: admin@mtaserver.example.com
** 6) Bind password for postfix ldap user: UNSET
** 7) Bind password for amavis ldap user: UNSET
Select, or 'r' for previous menu [r] 6
Password for ldap Postfix user (min 6 characters): Admin123
Mta configuration
1) Status: Enabled
2) MTA Auth host: bvea33103
3) Enable Spamassassin: yes
4) Enable Clam AV: yes
5) Notification address for AV alerts: admin@mtaserver.example.com
6) Bind password for postfix ldap user: set
** 7) Bind password for amavis ldap user: UNSET
Select, or 'r' for previous menu [r] 7
Password for ldap Amavis user (min 6 characters): Admin123
Mta configuration
1) Status: Enabled
2) MTA Auth host: bvea33103
3) Enable Spamassassin: yes
4) Enable Clam AV: yes
5) Notification address for AV alerts: admin@mtaserver.example.com
6) Bind password for postfix ldap user: set
7) Bind password for amavis ldap user: set
Select, or 'r' for previous menu [r]
Main menu
1) Common Configuration:
+Hostname: mtaserver.example.com
+Ldap master host: ldapserver
+Ldap port: 389
+Ldap Admin password: set
+LDAP Base DN: cn=zimbra
+Secure interprocess communications: yes
+TimeZone: Asia/Colombo
2) zimbra-mta: Enabled
3) zimbra-proxy: Enabled
+Enable POP/IMAP Proxy: TRUE
+IMAP server port: 7143
+IMAP server SSL port: 7993
+IMAP proxy port: 143
+IMAP SSL proxy port: 993
+POP server port: 7110
+POP server SSL port: 7995
+POP proxy port: 110
+POP SSL proxy port: 995
******* +Bind password for nginx ldap user: Not Verified
+Enable HTTP[S] Proxy: FALSE
4) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
Address unconfigured (**) items (? - help) 3
Proxy configuration
1) Status: Enabled
2) Enable POP/IMAP Proxy: TRUE
3) IMAP server port: 7143
4) IMAP server SSL port: 7993
5) IMAP proxy port: 143
6) IMAP SSL proxy port: 993
7) POP server port: 7110
8) POP server SSL port: 7995
9) POP proxy port: 110
10) POP SSL proxy port: 995
**11) Bind password for nginx ldap user: Not Verified
12) Enable HTTP[S] Proxy: FALSE
Select, or 'r' for previous menu [r] 11
Password for ldap Nginx user (min 6 characters): [oTXqSIveV] Admin123
Proxy configuration
1) Status: Enabled
2) Enable POP/IMAP Proxy: TRUE
3) IMAP server port: 7143
4) IMAP server SSL port: 7993
5) IMAP proxy port: 143
6) IMAP SSL proxy port: 993
7) POP server port: 7110
8) POP server SSL port: 7995
9) POP proxy port: 110
10) POP SSL proxy port: 995
11) Bind password for nginx ldap user: set
12) Enable HTTP[S] Proxy: FALSE
Select, or 'r' for previous menu [r] r
Main menu
1) Common Configuration:
2) zimbra-mta: Enabled
3) zimbra-proxy: Enabled
4) Enable default backup schedule: yes
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help)
*** CONFIGURATION COMPLETE - press 'a' to apply
Select from menu, or press 'a' to apply config (? - help) a
Save configuration data to a file? [Yes]
Save config in file: [/opt/zimbra/config.30838]
Saving config in /opt/zimbra/config.30838...done.
The system will be modified - continue? [No] yes
Operations logged to /tmp/zmsetup.08202012-074938.log
Setting local config values...done.
Updating ldap_root_password and zimbra_ldap_password...done.
Setting up CA...done.
Deploying CA to /opt/zimbra/conf/ca ...done.
Creating SSL certificate...done.
Installing mailboxd SSL certificates...done.
Creating server entry for mbs1server.example.com...done.
Saving CA in ldap ...done.
Saving SSL Certificate in ldap ...done.
Setting spell check URL...done.
Setting service ports on mbs1server.example.com...done.
Adding mbs1server.example.com to zimbraMailHostPool in default COS...done.
Installing webclient skins...
sky...done.
lemongrass...done.
hotrod...done.
bare...done.
carbon...done.
lake...done.
sand...done.
bones...done.
steel...done.
twilight...done.
smoke...done.
oasis...done.
waves...done.
tree...done.
pebble...done.
lavender...done.
beach...done.
Finished installing webclient skins.
Posted in: 
0 comments:
Post a Comment